Eco-8

Servo Installation
You have probably noticed that there are no holes in your stock Eco 8 frame for your servos. You have to drill them yourself. Depending on which servos you use will depend on the placement. I'm not going to tell you where to place the servos. What you should try to do is place the servo where you think it should be. Align the servo arm so that it will be 90 degrees from the swashplate, then drill the holes through the frame.

You have the option to use screws which come with the servo or use a nut and bolt. Either will work, it just depends on what you prefer. You should use the rubber grommets and brass fittings for mounting your servos.